
Fuse Terminal, Rail Mounted
Pre-Insulated Terminals, Ferrules & BlocksRail-mounted fuse terminal for panel wiring protection.

Ferrule 4 mm
Pre-insulated 4 mm wire ferrules in colour-coded variants.
Other sizes and configurations available on request.
Wire-end ferrules, also called bootlace ferrules, form a sleeve around suitable stranded wire ends for compatible electrical terminals. The existing Ferrule 4 mm entry is a pre-insulated wire ferrule, distinct from a cable lug and from the catalogue’s insulating Boot Lug cover.
This catalogue entry describes pre-insulated wire ferrules with blue, red and yellow colour variants. It does not identify a brand, twin-wire configuration, uninsulated option or part number. Confirm the precise ferrule configuration and manufacturer before ordering.
The catalogue labels this product “4 mm”. It does not state whether this refers to conductor cross-sectional area or a physical dimension, so it must not be interpreted automatically as 4 mm². Confirm conductor capacity, sleeve length and dimensions from the selected datasheet. Colour alone does not establish a conductor size.
Ferrules are used with suitable stranded wire ends where the terminal manufacturer allows or requires them, including appropriate panel wiring connections. Compatibility depends on the wire, ferrule and terminal design; they are not a universal substitute for cable lugs or other terminals.
Provide the wire cross-sectional area, conductor construction, terminal reference and required ferrule dimensions. Have a qualified electrical professional check terminal acceptance and the manufacturer’s specified tooling and installation requirements. Do not rely on the photograph or insulation colour for selection.
Panel builders, electrical contractors and maintenance buyers can send Skyline a ferrule schedule with quantities and terminal references. Identify any specified brand or configuration and confirm the offered item’s datasheet, price and delivery arrangements in the quotation.
Send the wire size and construction, terminal reference, required sleeve dimensions or part number, preferred specification, quantity, application and delivery location. If “4 mm” is your only reference, request confirmation of its meaning before ordering.

Rail-mounted fuse terminal for panel wiring protection.

Ground line terminal for earthing connections.

End cover accessory for terminal block strips.

Screw-strip terminal block for panel wiring distribution.